Cisco Systems CGS252016S8PC manual Mounting the Switch into a Rack

Chapter 2 Switch Installation

Installing the Switch

Mounting the Switch into a Rack

After you attach the brackets onto the switch, use the four supplied number-12 Phillips machine screws to attach the brackets to the rack as shown in Figure 2-13. (Brackets for the 19-inch rack shown in this example.)

Note We recommend attaching the cable guide to prevent the cables from obscuring the LED panels on the devices in the rack. Use the supplied black screw shown in Figure 2-13[6] to attach the cable guide to the left or right bracket.

Figure 2-13 Rack Mounting

		1	Mid-mount position	4	Phillips machine screws
2			Cable screw	5	Power supply-side mounting position
3			Cable-side mounting position	6	Cable guide
					Cisco CGS 2520 Hardware Installation Guide
	78-19377-02					2-15