Chapter 3 Configuring and Managing the IP Camera
Applications Windows
Applications Windows
The Applications windows provide options for configuring and managing a variety of applications and IP camera activities.
The following sections describe the Applications windows in detail:
•Mail & FTP Window, page
•Motion Detection Window, page
•Event Window, page
•SNMP Window, page
•Alarm I/O Ports Window, page
•PTZ
•Preset Positions Window, page
Mail & FTP Window
When the IP camera detects an event, it can send an
The
•By including a link to an FTP server from which recipients can download the video file to a local PC.
•By including the video file as an attachment that recipients can view using a standard media player. The file name is
–Camera_name is the name of the IP camera, as configured in the Camera Name field in the Basic Setup window.
–Event_name describes the event that caused the alert. For motion detection events, this field is the name of the video field area in which motion was detected (for example, Window 2). For input events, this field is input1 or input2, depending on which input port the event was detected.
–yymmdd is the
–hhmmss is the, hours, minutes, and seconds at which the event occurred.
–xxx is the format of the file (asf, mp4, or 3gp), as configured in the Video Format
Note A large video file may exceed the maximum file size for
By default, the video in a video file starts when an event starts and ends 5 seconds after the event ends. You can designate that additional video be included before and after an event as described in the “Event Window” section on page
|
| Cisco Video Surveillance 2600 IP Camera User Guide |
|
| |
|
|
| |||
|
|
|
| ||
|
|
|
| ||
