Chapter 3 Configuring and Managing the IP Camera
Setup Windows
•Security
–Product Process
–Initialization
–Complexity
•Applications
–Mail & FTP
–Motion Detection
–Event
–SNMP
–Alarm I/O Ports
–PTZ
•Status
–System
–Audio Video
–Network
–Syslog & Log
–Video Log
Setup Windows
The Setup windows let you configure a variety of basic and advanced settings for the IP camera, and to designate IP addresses that are allowed or denied access to the IP camera.
The following sections describe the Setup windows in detail:
•Basic Setup Window, page
•Advanced Setup Window, page
•IP Filter Window, page
•EAPOL Window, page
Basic Setup Window
The Basic Setup window provides options for configuring device and network settings for the IP camera.
To display the Basic Setup window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page
If you change any options except the Current Date/Time in the Basic Setup window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.
Cisco Video Surveillance 2600 IP Camera User Guide
|
| ||
|
|