Chapter 4 Viewing Live Video

Viewing Video through Third-Party Devices or Software

Accessing the MJPEG Stream

In the following commands, the ip_address argument represents the IP address of the IP camera. After you enter the command, enter your IP camera user name and password when prompted.

To access the MJPEG stream with video and audio, enter this command: rtsp://ip_address/img/jpgmedia.sav

To access the MJPEG stream with video only, enter this command: rtsp://ip_address/img/jpgvideo.sav

Accessing Dual Streams (H.264 + MJPEG)

In the following commands, the ip_address argument represents the IP address of the IP camera. After you enter the command, enter your IP camera user name and password when prompted.

Dual Stream (H.264 + MJPEG):

To access the H.264 stream with video and audio, enter this command: rtsp://ip_address/img/h264media.sav

To access the H.264 stream with video only, enter this command: rtsp://ip_address/img/h264video.sav

To access the MJPEG stream with video and audio, enter this command: rtsp://ip_address/img/jpgmedia.sav

To access the MJPEG stream with video only, enter this command: rtsp://ip_address/img/jpgvideo.sav

Accessing Dual Streams (MPEG-4 + MJPEG)

In the following commands, the ip_address argument represents the IP address of the IP camera. After you enter the command, enter your IP camera user name and password when prompted.

To access the MPEG-4 stream with video and audio, enter this command: rtsp://ip_address/img/media.sav

To access the MPEG-4 stream with video only, enter this command: rtsp://ip_address/img/video.sav

To access the MJPEG stream with video and audio, enter this command: rtsp://ip_address/img/jpgmedia.sav

To access the MJPEG stream with video only, enter this command: rtsp://ip_address/img/jpgvideo.sav

Cisco Video Surveillance 2600 IP Camera User Guide

4-8

OL-24127-02

 

 

Page 78
Image 78
Cisco Systems CIVS-IPC-2600 manual Accessing the Mjpeg Stream, Accessing Dual Streams H.264 + Mjpeg