Cisco Systems CIVS-IPC-2600 manual Option Description

Chapter 3 Configuring and Managing the IP Camera

Setup Windows

Table 3-3	Advanced Setup Window Options (continued)
Option		Description
Max RTP Video Packet		Maximum number of bytes per video packet that are sent in each RTP
Length		request.
		Configure a lower number if you are streaming video to a cell phone that
		requires smaller data packets.
		Valid values are 400 through 1400. The default value is 1400.
Max RTP Audio Packet		Maximum number of bytes per audio packet that are sent in each RTP
		request.
		Configure a lower number if you are streaming video to a cell phone that
		requires smaller data packets.
		Valid values are 400 through 1400. The default value is 1400.
Enable Multicast		Check this check box to send video and audio data as a multicast stream.
		When multicast is enabled, the IP camera sends video and audio to the
		multicast addresses that you designate. Multicast enables multiple devices to
		receive the video signal from the IP camera simultaneously.
Video Address		Appears if you enabled multicast. Enter the multicast IP address on which
		the IP camera sends a video stream.
		The default value is 224.2.0.1.
Video Port		Appears if you enabled multicast. Enter the port on which the IP camera
		sends a multicast video stream.
		Valid values are even numbers 1024 through 65534. The default value is
		2240.
Audio Address		Appears if you enabled multicast. Enter the multicast IP address on which
		the IP camera sends an audio stream.
		The default value is 224.2.0.1.
Audio Port		Appears if you enabled multicast. Enter the port on which the IP camera
		sends a multicast audio stream.
		Valid values are even numbers 1024 through 65534. The default value is
		2242.
Time to Live		Appears if you enabled multicast. Enter the number of hops, which specifies
		the number of network devices that an audio-video stream can pass before
		arriving at its destination or being dropped.
		Valid values are 1 through 255. The default value is 16.

Cisco Video Surveillance 2600 IP Camera User Guide

OL-24127-02 3-9