Cisco Systems CIVS-IPC-2600 manual MPEG-4 Settings

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-9	Video Window Options (continued)
Option		Description
Max. Frame Rate		Choose the desired maximum frame rate per second for the primary video
		stream from the IP camera.
		The default values are 30 for NTSC and 25 for PAL.
		A higher maximum frame rate provides better video quality but consumes
		more bandwidth

H.264 Settings 2

Note These H.264 Settings 2 options appear if you choose the Dual H.264 Streams from the Streaming Mode drop-down list.

Resolution	Choose the resolution of the secondary video stream.
Video Quality Control	Choose an option for video quality for the secondary video stream from the
	IP camera:
	• Constant Bit Rate—Specifies that the video stream is output at or close
	to the constant bit rate that you choose. The default value is 64 Kbps. A
	higher bit rate provides better video quality but consumes more
	bandwidth.
	• Fixed Quality—Specifies that video is output at a fixed quality, which
	ranges from Very High to Very Low. The bit rate may vary to maintain
	this quality. The default fixed quality is Normal. A higher fixed quality
	provides better video quality but consumes more bandwidth.
Max. Frame Rate	Choose the desired maximum frame rate per second for the secondary video
	stream from the IP camera.
	The default values are 15 for NTSC or 15 for PAL.
	A higher maximum frame rate provides better video quality but consumes
	more bandwidth
MPEG-4 Settings 1

Note These MPEG-4 Settings options appear if you choose Single MPEG-4 Stream, Dual MPEG-4 Streams, or Dual Streams (MPEG-4 + MJPEG) from the Streaming Mode drop-down list.

Resolution

Choose the desired video resolution format for the primary video stream from the IP camera.

The default resolution is 720 x 480 for NTSC or 720 x 576 for PAL.

	Cisco Video Surveillance 2600 IP Camera User Guide
3-18	OL-24127-02