Cisco Systems CIVS-IPC-2600 manual Side of IP Camera

Chapter 1 Overview

IP Camera Overview

4	PoE LED (green)	Indicates information about PoE as follows:
		• On—PoE connection is detected
		• Off—PoE connection is not detected
5	Analog video output	BNC connector for video output (75 ohm).
6	Speaker output	Allows the connection of an optional external speaker through a
		standard 3.5 mm mini phone jack.
7	Microphone input	Allows the connection of an optional external microphone (with
		pre-amplifier) through a standard 3.5 mm mini phone jack.
		Microphones that are designed for use with PCs usually are
		compatible with this input jack.
		Connecting an external microphone disables the internal
		microphone on the IP camera.
8	GPIO ports	General purpose input/output (GPIO) terminal block that includes
		a 2-pin RS-485 port, 2 input ports (labeled DI1, DI2), 2 output
		ports (labeled DO1, DO2), and 4 ground ports (labeled GND).
9	Power input	Provides for the connection of an optional external 12 V, 1 amp DC
		power adapter.

Figure 1-3and the table that follows describe the items on the side of the IP camera.

Figure 1-3 Side of IP Camera

1	DC auto iris lens connector	Connection for cable from DC auto iris lens
2	Lockdown cable slot	Connection for Kensington-compatible lockdown equipment

Cisco Video Surveillance 2600 IP Camera User Guide

OL-24127-02 1-5