Send document comments to nexus3k-docfeedba ck@cisco.com
1-12
Cisco Nexus 3000 Series Hardware Installation Guide
OL-25338-04
Chapter 1 Overview of the Cisco Nexus 3000 Series Switches
Cisco Nexus 3064 Switch
Chassis for the Cisco Nexus 3064 Switch
The 1-RU Cisco Nexus 3064 chassis (part number N3K-C3064PQ-10GE or N3K-C3064PQ-10GX) is
1.72 inches (4.37 cm) high, 17.3 inches (43.9 cm) wide, and 19.7 inches (45.0 cm) deep. This switch is
designed for 19-inch (48.3 cm) racks. Its switch ports are at the rear of the chassis in clo se proximity to
server ports, and the power supplies and fan tray modules are accessi ble from the front for easy
replacement. You can order t his switch with forwar d or reverse airflow depend ing on whether the fro nt
of the switch is in a cold aisle (forward airflow) or in a hot aisle (reverse airflow). You can also order the
switch with AC or DC power supplies.
Fully populated with two power supplies and a fan tray, the switch weighs 20.5 pounds (9.3 kg) and can
be easily installed by one or two people.
Figure 1-5 shows the front of the chassi s and identifies the components th at you use to install and
connect the chassis. Figure 1-6 shows the rear of the chassis and identifies the c omponents that you use
to install and connect the chas sis.
Figure 1-5 Front View of the Cisco Nexus 3064 Switch
1
2
1
239974
6
7
3
4
5
1AC or DC power supply (2 ) (AC power supply shown ) 5Status LED
2Fan tray (1) 6USB port (1)
3Management ports (2) 7Console port (1)
4ID LED