Send document comments to nexus3k-docfeedba ck@cisco.com
1-21
Cisco Nexus 3000 Series Hardware Installation Guide
OL-25338-04
Chapter 1 Overview of the Cisco Nexus 3000 Series Switches
Cisco Nexus 3548 Switch
The Cisco Nexus 3548 is compatible with existing Gigabit Ethernet infrastructures. Both the uplink and
downlink 10 Gigabit Ethernet interfaces can al so operate in Gigabit Ethernet mode. Ta ble 1-15 lists the
Gigabit Ethernet SFP transceivers you can use.
Tab l e 1-14 Supported 10-Gigabit Ethernet transceivers for the Cisco Nexus 3548 Switch
Part Number Transceivers and Cables
SFP-10G-SR 10-Gigabit Ethernet—short range SFP+ module
SFP-10G-LR 10-Gigabit Ethernet—long range SFP+ module
SFP-10G-ER Cisco 10GBASE-ER SFP+ Module for SMF
SFP-H10GB-CU1M 10-Gigabit Ethernet transceiver connected to a 1-meter copper cable
SFP-H10GB-CU3M 10-Gigabit Ethernet transceiver connected to a 3-meter copper cable
SFP-H10GB-CU5M 10-Gigabit Ethernet transceiver connected to a 5-meter copper cable
SFP-H10GB-ACU7M 10-Gigabit Ethernet transceiver connected t o an active 7-meter copper cable
SFP-H10GB-ACU10M 10-Gigabit Ethernet transceiver connected to an active 10- meter copper cable
Tab l e 1-15 Supported Gigabit Ethernet Transceivers for the Cisco Nexus 3548 Switch
Part Number Transceivers and Cables
GLC-T 1000BASE-T
GLC-SX-MM Gigabit Ethernet multimode fiber (MMF) SFP transceiver with an LC connector of
type SX
GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
GLC-LH-SM Gigabit Ethernet single-mode fiber (SMF) SFP transceiver with an LC connector of
type LX/LH
GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM