A-6
Cisco Transport Manager Release 8.5 GateWay/CORBA User Guide and Programmer Manual
OL-14253-01
AppendixA N otifications, Fault Management, and Probable Cause Mapping
Supported Events
Attribute value change notifications are sent to the NMS for the objects and attributes in the following
table.
Note • CTM does not generate AVC events for SubnetworkConnection for the ONS 15501, ONS 15530,
and ONS 15540.
•For the MGX 8880/8850/8830, CTM generates AVC events for the object types
OT_MANAG ED_ELEM ENT and OT _EMS.
A.4.4 State Change EventThe following table lists the state change event types and attributes.
TableA-8 Attribute Value Change Notifications
Object Type Attributes
OT_EMS na tiveEMS Name
OT_MANAGED_ELEMENT nativeEMSName—This field reflects the new managed element name if it is
changed.
location
version
productName
OT_MULTILAYER_SUBNETWORK NativeEMSName
OT_TOPOLOGICAL_LINK1
1. The OT_TOPOLOGICAL_LINK event notifies the NMS that some attribute of the topological link changed.
None
OT_SUBNETWORK_CONNECTION2
2. The OT_SUBNETWORK_CONNECTION event is generated only when CTM fails to delete an SNC and it remains in the same state.
None
OT_L2TOPOLOGY NativeEMSName
OT_MLVLAN None
Note This event notifies the NMS that the VLAN was updated.
OT_ROLL None
Note This event notifies the NMS that the roll was updated.
OT_VCAT None
Note This event notifies the NMS that the VCAT changed.
TableA-9 State Change Event
Attribute Name Type Supported by CTM?
notificationId string Yes. The uniqueness and sequence of the notification ID are not
guaranteed.
objectName globaldefs::NamingAttributes_T Yes.
objectType notifications::ObjectType_T Yes.