Cisco Systems OL-14253-01 appendix Attribute Value Change

Appendix A Notifications, Fault Management, and Probable Cause Mapping

Supported Events

Table A-6	Object Deletion Notifications (continued)
Object Type		Type Sent in remainder_of_body for Object Deletion Event
OT_EQUIPMENT		equipment::Equipment_T
OT_PROTECTION_GROUP		protection::ProtectionGroup_T
OT_L2TOPOLOGY		MultiLayerSubnetwork::L2Topology_T
OT_MLVLAN		MultiLayerSubnetwork::MLVLAN_T
OT_ROLL		MultiLayerSubnetwork::Roll_T
OT_VCAT		SubnetworkConnection::VCAT_T

CTM does not generate object deletion events for SubnetworkConnection for the ONS 15501,

ONS 15530, and ONS 15540.

For the MGX 8880/8850/8830, CTM generates object deletion events for the object types

OT_MANAGED_ELEMENT and OT_EQUIPMENT.

Note The number of equipment holders for all NEs supported by CTM is constant. To reduce traffic between CTM and the NMS, CTM does not generate object deletion events for equipment holders. The number of PTPs on equipment is also constant. Therefore, CTM generates only object deletion events for equipment.

A.4.3 Attribute Value Change

The following table lists the attribute value change (AVC) types and attributes.

Table A-7	Attribute Value Change
Attribute Name		Type	Supported by CTM?
notificationId		string	Yes. The uniqueness and sequence of the notification ID are
			not guaranteed.
objectName		globaldefs::NamingAttributes_T	Yes.
objectType		notifications::ObjectType_T	Yes.
emsTime		globaldefs::Time_T	Yes.
neTime		globaldefs::Time_T	No.
edgePoint		boolean	No.
attributeList		notifications::NVList_T	Yes.

Cisco Transport Manager Release 8.5 GateWay/CORBA User Guide and Programmer Manual

OL-14253-01 A-5