Cisco Systems OL-14253-01 appendix Protection Switch, RollState-CTM supports the following values

Appendix A Notifications, Fault Management, and Probable Cause Mapping

Supported Events

Table A-10 State Change Event Notifications (continued)

Object Type

OT_ROLL

OT_VCAT

Attributes

rollState—CTM supports the following values:

•ROLL_PENDING

•ROLL_COMPLETED

•ROLL_CANCELLED

•ROLL_INCOMPLETE

vcatState—CTM supports the following values:

•VCATS_DELETING

•VCATS_PARTIAL

•VCAT_ACTIVE

1.The OT_SUBNETWORK_CONNECTION event is generated only when CTM changes the SNC. If CTC or any other tool is used to change the SNC, CTM does not report this event.

CTM does not generate state change events for EquipmentHolder and SubnetworkConnection for the ONS 15501, ONS 15530, and ONS 15540.

For the MGX 8880/8850/8830, CTM generates state change events for the object types

OT_MANAGED_ELEMENT and OT_EQUIPMENT_HOLDER.

A.4.5 Protection Switch

The following table lists the protection switch types and attributes. The protection switch event is not supported for MGX 8880/8850/8830 NEs.

Table A-11			Protection Switch
	Attribute Name			Type	Supported by CTM?
	notificationId			String	Yes. The uniqueness and the sequence of the
					notification ID are not guaranteed.
	emsTime			globaldefs::Time_T	Yes.
	neTime			globaldefs::Time_T	No.
	ProtectionType			protection::ProtectionType_T	No.
	switchReason			protection::switchReason_T	No.
	layerRate			transmissionParameters::LayerRate_T	No.
	groupName			globaldefs::NamingAttributes_T	No.
					(Yes for ONS 15540 and ONS 15530.)
	protectedTP			globaldefs::NamingAttributes_T	No.
					(Yes for ONS 15540 and ONS 15530.)
	switchAwayFromTP			globaldefs::NamingAttributes_T	Yes for ONS 15540 and ONS 15530.
	switchToTP			globaldefs::NamingAttributes_T	No.
					(Yes for ONS 15540 and ONS 15530.)
		Cisco Transport Manager Release 8.5 GateWay/CORBA User Guide and Programmer Manual
	A-8				OL-14253-01