Cisco Systems OL-14253-01 High voltage 25581, Low voltage 25582, Disable inactive user 25584

Appendix A Notifications, Fault Management, and Probable Cause Mapping

Probable Cause Mapping

Table A-23		CTM GateWay/CORBA Mapping for the ONS 15310 CL, ONS 15327, ONS 15454 SONET, and ONS 15454
		SDH R5.0 (continued)
				CTM Internal Index (Not
	TMF Mapping		NE Native Probable Cause	Reported in the Notification)
	UNIDENTIFIED		High voltage	25581
	UNIDENTIFIED		Low voltage	25582
	UNIDENTIFIED		Connection equipment mismatch	25583
	UNIDENTIFIED		Disable inactive user	25584
	UNIDENTIFIED		Disable inactive user	25585
	UNIDENTIFIED		Suspend user	25586
	UNIDENTIFIED		Suspend user clear	25587
	UNIDENTIFIED		Line DCC termination failure	25588
	UNIDENTIFIED		Multiplex section DCC termination failure	25589
	UNIDENTIFIED		Gigabit Ethernet out of sync	25590
	AIS		Alarm indication signal in Tx	25591
	AIS		Remote alarm indication in Tx	25592
	UNIDENTIFIED		Incoming signal loss on fibre channel interface	25594
	UNIDENTIFIED		Incoming synchronization loss on fibre channel interface	25595
	UNIDENTIFIED		Out of frame detected by GFP receiver	25596
	UNIDENTIFIED		Client signal loss frames detected by GFP receiver	25597
	UNIDENTIFIED		Client synchronization loss frames detected by GFP receiver	25598
	UNIDENTIFIED		Sequence mismatch	25599
	UNIDENTIFIED		Loss of alignment	25600
	UNIDENTIFIED		Out of use—administrative command	25601
	UNIDENTIFIED		Out of use—transport failure	25602
	UNIDENTIFIED		VCAT group down	25603
	UNIDENTIFIED		VCAT group degraded	25604
	UNIDENTIFIED		VCAT group incomplete	25605
	UNIDENTIFIED		K byte channel failure	25606
	UNIDENTIFIED		Industrial high temperature	25607
	UNIDENTIFIED		APS invalid mode	25608
	UNIDENTIFIED		IP address already in use within the same DCC area	25609
	UNIDENTIFIED		Node name already in use within the same DCC area	25610
	UNIDENTIFIED		Rear panel Ethernet link removed	25611
	UNIDENTIFIED		Manual switch to protect resulted in no traffic switch	25612
	UNIDENTIFIED		Manual switch back to working resulted in no traffic switch	25613
	UNIDENTIFIED		Forced switch to protection resulted in no traffic switch	25614
	UNIDENTIFIED		Forced switch back to working resulted in no traffic switch	25615
	UNIDENTIFIED		Loss of signal for optical channel	25616
		Cisco Transport Manager Release 8.5 GateWay/CORBA User Guide and Programmer Manual
	A-62			OL-14253-01