Cisco Systems OL-14253-01 appendix Vcat group down 25603, Incoming payload signal absent 25616

Appendix A Notifications, Fault Management, and Probable Cause Mapping

Probable Cause Mapping

Table A-24		CTM GateWay/CORBA Mapping for the ONS 15310 CL, ONS 15454 SONET, and ONS 15454 SDH R6.0 and
		R8.0; ONS 15327 R6.0 (continued)
				CTM Internal Index (Not
	TMF Mapping		NE Native Probable Cause	Reported in the Notification)
	UNIDENTIFIED		VCAT group down	25603
	UNIDENTIFIED		VCAT group degraded	25604
	UNIDENTIFIED		VCAT group incomplete	25605
	UNIDENTIFIED		K byte channel failure	25606
	UNIDENTIFIED		Industrial high temperature	25607
	FOP_APS		APS invalid mode	25608
	UNIDENTIFIED		IP address already in use within the same DCC area	25609
	UNIDENTIFIED		Node name already in use within the same DCC area	25610
	UNIDENTIFIED		Rear panel Ethernet link removed	25611
	UNIDENTIFIED		Manual switch to protect resulted in no traffic switch	25612
	UNIDENTIFIED		Manual switch back to working resulted in no traffic switch	25613
	UNIDENTIFIED		Forced switch to protection resulted in no traffic switch	25614
	UNIDENTIFIED		Forced switch back to working resulted in no traffic switch	25615
	LOS		Incoming payload signal absent	25616
	UNIDENTIFIED		Incoming overhead signal absent	25617
	UNIDENTIFIED		Optical safety remote interlock on	25618
	UNIDENTIFIED		OSPF hello fail	25619
	UNIDENTIFIED		Automatic power control correction skipped	25620
	UNIDENTIFIED		Plug-in module range settings mismatch	25621
	UNIDENTIFIED		APC cannot set value due to range limits	25622
	UNIDENTIFIED		Automatic WDM ANS finished	25623
	UNIDENTIFIED		Port failure	25624
	UNIDENTIFIED		Unreachable port target power	25625
	UNIDENTIFIED		Port add power degrade low	25626
	UNIDENTIFIED		Port add power degrade high	25627
	UNIDENTIFIED		Port add power fail low	25628
	UNIDENTIFIED		Port add power fail high	25629
	UNIDENTIFIED		Equipment power failure at connector A	25630
	UNIDENTIFIED		Equipment power failure at connector B	25631
	UNIDENTIFIED		Equipment power failure at return connector A	25632
	UNIDENTIFIED		Equipment power failure at return connector B	25633
	UNIDENTIFIED		Far-end manual switch back to working—span	25634
	UNIDENTIFIED		Far-end forced switch back to working—span	25635
	UNIDENTIFIED		Universal transponder module hardware failure	25636
	UNIDENTIFIED		Universal transponder module communication failure	25637
		Cisco Transport Manager Release 8.5 GateWay/CORBA User Guide and Programmer Manual
	A-82			OL-14253-01