Cleveland Range KGL-40-TSH, KGL-40, KGL-40-T, KGL-40SH Ensure Kettle Is At Room Temperature And

Models: KGL-40, KGL-60, KGL-80, KGL-100, KGL-40-T, KGL-60-T, KGL-80-T, KGL-40-SH, KGL-60-SH, KGL-40-TSH KGL-100, KGL-40-T KGL-40-TSH, KGL-40, KGL-40-T, KGL-40SH KGL-80-T, KGL-40-SH

1 42
Download 42 pages 34.91 Kb
Page 2
Image 2
FOR THE USER

FOR THE USER

IMPORTANT!

ENSURE KETTLE IS AT ROOM TEMPERATURE AND

PRESSURE GAUGE IS SHOWING ZERO OR LESS PRESSURE

PRIOR TO REMOVING ANY FITTINGS.

FOR YOUR SAFETY

DO NOT STORE OR USE GASOLINE

OR ANY OTHER

FLAMMABLE LIQUIDS AND

VAPOURS IN THE VICINITY

OF THIS OR ANY OTHER

APPLIANCE.

.

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation operating and maintenance instructions thoroughly before installing or servicing this equipment.

IMPORTANT

The following points are to insure the safe installation and operation of this equipment:

Insure all gas and electrical supplies match rating plate and electrical stickers.

Observe all clearance requirements.

Disconnect the electrical power supply to the appliance before cleaning or servicing unit.

All service must be performed by a qualified Cleveland Range Technician.

Do not obstruct the flow of combustion and ventilation air.

The installation and connection must comply with current local codes, or in the absence of local codes, with CAN/CGA-B149.1 and .2 installation code or with the national fuel gas code, ANSI Z223.1-L988.

Post in a prominent location, instructions to be followed in the event the user smells gas. This information shall be obtained by consulting your local gas supplier.

The appliance and its individual shut off valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psig. (3.45 kpa).

The appliance must be isolated from the gas supply piping system by closing its individual manual shut off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig. (3.45 kpa).

RETAIN THIS MANUAL FOR YOUR REFERENCE.

Page 2
Image 2
Cleveland Range KGL-40-TSH, KGL-40, KGL-40-T, KGL-40SH manual Ensure Kettle Is At Room Temperature And, For Your Safety