Microsoft Windows NT
Drivers for the SCSI controllers and tape drive hardware are located on Support Software Diskettes and on the Compaq SmartStart and Support Software CD. The Support Software ships with each computer or can be downloaded from the Compaq website. The software tape device driver is located either with your tape backup software or with the operating system. Refer to your backup application installation guide for more information regarding additional software that might be needed.
Table
Microsoft Windows NT
Controller | Software Driver Information |
■
■
■
■LVD Wide SCSI Controllers
Refer to "Compaq SCSI Controller Support" in the NTREADME.HLP file on the Compaq Support Software for Microsoft Windows NT diskette, Version 1.21 or later.
IMPORTANT: If the SCSI controller to which your drive is attached was not present during your initial Windows NT installation, install the SCSI device driver for the controller before installing the tape class driver.
Refer to “Compaq Tape Support” in the NTREADME.HLP file on the Compaq Support Software for Microsoft Windows NT diskette.
