Operation 4-7
Figure 4-9. Slide stopper
2.To remove cassettes in positions 1 through 5 use the access slots on the bottom of the magazine to slide the cassettes out the front of the magazine.
3.Turn the magazine opening slots up. Gently tap the unit until the cassettes in positions 6 and 7 drop to the bottom slots.
4.Repeat steps 1 and 2.
5.Press the magazine stopper down to pull the cassette from position 8.
Ejecting the Magazine
To eject a cassette magazine from the DAT AutoLoader, press the Eject button or issue an UNLOAD command from the host. The following sequence of events occurs:
1.The tape is rewound to BOP (Beginning of Partition).
2.If the tape is
3.The tape is then rewound to BOM (Beginning of Media) and unthreaded.
4.The AutoLoader replaces the cassettes in the magazine in the correct order.
5.The magazine is ejected.
