LCD Menu Screens
To enter the menu mode, press and hold the select button for 5 seconds. The AutoLoader will exit the menu mode if no button is pressed within a
| Table |
|
| LCD Menu Screens |
|
|
|
|
Menu Screen | Features |
|
|
|
|
>Version | The main menu screen. Pressing the Select button advances the arrow |
|
Auto Load | to the next item on the menu: Prdrives. |
|
Unload | Pressing the Enter button selects that sub menu. |
|
Contrast |
| |
|
| |
Orientation |
|
|
Language |
|
|
|
|
|
TSL10000 | The version screen displays information about the autoloader including |
|
SCSI ID#5 | autoloader and drive serial numbers. |
|
Ver.0000 |
|
|
S/NLxxxxxxxx |
|
|
S/NDxxxxxxxx |
|
|
|
|
|
Auto Load | The auto load screen allows the auto load feature to be turned on or off. |
|
>OFF | Pressing the Select button moves the arrow to the other mode. Pressing |
|
the Enter button selects that mode. When auto load is ON and the |
| |
ON | AutoLoader is in the one cassette mode, the AutoLoader automatically |
|
| loads the cassette into the drive. |
|
|
|
|
Unload | The Unload Continuous OFF selection only affects the AutoLoader when: |
|
Continuous | 1) the AutoLoader is loaded with 8 cassettes, in the 8 cassette mode, 2) |
|
>OFF | cassette #8 is in the drive and 3) a SCSI unload command is issued. The |
|
Autoloader will unload cassette #8 and stop. |
| |
ON | If Unload Continuous is ON, the AutoLoader will unload cassette #8 and |
|
| then load cassette #1 into the drive. Pressing the SELECT button moves |
|
| the arrow to the next item on the menu. Pressing the ENTER button |
|
| selects that mode. |
|
|
|
|
Contrast | The contrast adjustment screen allows the display’s contrast to be |
|
Adjustment | adjusted. Pressing the Select button increases contrast until maximum |
|
| contrast is reached. Pressing Select again changes the display to |
|
| minimum contrast. The number of darkened bars (see Figure |
|
| Cassettes position) on the bottom indicates the relative magnitude of the |
|
| contrast. |
|
continued
