Compaq 326817-003 manual Hardware Settings, Jumper Description Default

2-2Compaq DAT AutoLoader Reference Guide

■Compaq SmartStart and Support Software CD

■Configuring the AutoLoader

The default hardware settings are set for a Compaq system (see Figure 2-1). The settings in the DAT AutoLoader can be changed if required by a particular system.

Figure 2-1. Autoloader jumper pins

	Table 2-1
	Hardware Settings
Jumper	Description	Default
	SCSI ID Bit 0	OFF
	SCSI ID Bit 1	ON
	SCSI ID Bit 2	ON
	Reserved	OFF
	Reserved	OFF
	Parity Enable	ON

Note: The default SCSI ID is set to 6. For other settings see, Table 2-2