Compex Systems SA33-3285-02 Array is Offline because Adapter Is Not Known to the Remaining Half of the Array , Failure of an Adapter and a Disk Drive

Array is Offline because Adapter Is Not Known to the Remaining Half of the
Array When this condition exists, the host system generates SRN 48755.
Tomaintain data consistency, SSA RAID-1 and RAID-10 arrays keep a record of the
adapters to which they are connected. If exactly one half of the array is connected to a
different adapter,the array remains in the Offline state unless you take specific action to
make the array available.
This type of problem can be caused by:
vIncorrect reconfiguration of an array
vSimultaneous failure of an SSAadapter and a disk drive
Failure of an Adapter and a Disk Drive
In Figure37, an SSA adapter and a disk drive have failed. When a new adapter is
installed, the array remains in the Offline state until the state of the SplitArray
Resolution flag is changed back to Primary.
System 1
SSA Adapter
Primary 1
Secondary 1
Figure37. Failure of an Adapter and a Disk Drive
Chapter8. Split-Site Management 203