6. Refer to Figure49.
7. Install the mounting screw 1, and tighten it fully.(The screw is supplied with the
Fast-Write Cache Option Card.)
8. Reinstall the adapter into the using system (see the Installation and Service Guide
for the using system).
Note: The battery on the Fast-Write Option Card is not fully charged.After the
adapter is connected to the power,initial battery charging completes in 5 to
60 minutes. During this time, the fast-write disks can be enabled and used,
but the fast-write function remains inactive. Todetermine whether the
fast-write cache is active or inactive, give the command:
ssa_fw_status -a ssaX -c
1
Figure49. Installing the Mounting Screw of the Fast-Write Cache Option Card
Chapter15. Removal and Replacement Procedures 335
|
|
|
|
|
|