If you select RAID-1, the following menu is displayed:
Add an SSA RAID Array
Type or select values in entry fields.
Press Enter AFTER making all desired changes.
[Entry Fields]
SSA RAID Manager ssa0
RAID Array Type raid_1
* Primary Disk +
* Secondary Disk +
Split Array Resolution Primary +
Enable Use of Hot Spares yes +
Choose Hot Spare only from Preferred Pool no +
Allow Hot Spare Splits no +
Allow Page Splits yes +
Initial Rebuild no +
Enable Fast-Write no +
F1=Help F2=Refresh F3=Cancel F4=List
F5=Reset F6=Command F7=Edit F8=Image
F9=Shell F10=Exit Enter=Do
For the meanings of the fields, see page 66.

Chapter6. Using the RAID Array Configurator 63