IntelliCarb Training Manual

Ice Drink Model ED150/175/300 Coldplate Cover

Ice Drink Model ED200/250 Coldplate Cover

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Liquid Level Probe

CO2

Check Valve with Ground Stud

In-line CO2 Check Valve

Probe

Ground Plate/Stud

 

 

FIGURE 9

FIGURE 10

 

3.Total Flex System for Ice Drink Models ED150/175/200/250/300

Total Flex Manifold (Insulation Removed)

Water Line

 

 

 

 

 

Plugs

Retainer Clip

Manifold Block

FIGURE 11

Total Flex is a system of water manifold blocks located at the front of the cold plate, adjacent to the cold plate inlets, for easy switch over of carbonated / non-carbonated beverage drinks. The right hand mani- fold block is for the beverage valves located to the right side of the ice chute, and the left block is for the left bank of valves. Each beverage valve on the dispenser can be set up for either carbonated or non-car- bonated drinks. Refer to the unit’s plumbing diagram for the factory carbonated / non-carbonated valve locations. The procedure for switching carbonated / non-carbonated water lines on a beverage valve is as follows:

A.Shut off the water supply to the dispenser. Depressurize and drain both the carbonated and non- carbonated water circuits.

B.Remove the retainer clip (2 screws) from the manifold block. Switch the plug and water line fitting to their respective carbonated / non-carbonated outlet locations on the block.

C.Replace the retainer clip. Turn on the water supply and energize the “switched” valve(s). Check for water leaks.

4.Important: Route the dispenser’s drain line to an open drain with the end of the tube above the flood level of the drain. The drain line must pitch downward and contain no “traps”.

5.Connect both the carbonator pump and motor unit and the dispenser to a grounded electrical sup- ply outlet.

Publication Number: TP01071

- 6 -

© 2004, IMI Cornelius Inc.

Page 9 Page 11
Page 10
Image 10
Cornelius Cold Beverage Dispenser manual Total Flex Manifold Insulation Removed
Page 9 Page 11

Cold Beverage Dispenser specifications

The Cornelius Cold Beverage Dispenser is an advanced piece of equipment devised to meet the increasing demand for customizable cold beverages in both commercial and residential environments. Recognized for its reliability and innovation, this dispenser is designed to serve a variety of beverages, including carbonated soft drinks, iced teas, and flavored water, making it a versatile addition for any establishment such as restaurants, cafes, and events.

One of the standout features of the Cornelius Cold Beverage Dispenser is its ability to dispense multiple beverages simultaneously. With a modular design, operators can select from several product configurations, allowing businesses to tailor their offerings according to customer preferences. This modularity not only ensures optimal use of space but also facilitates easy upgrades or changes to beverage options without significant downtime.

The dispenser is engineered with advanced refrigeration technologies, ensuring beverages are chilled to the optimal temperature for serving. Utilizing eco-friendly refrigerants, the system maintains energy efficiency while enhancing the cold retention capabilities of the beverages. The integrated cooling system is designed to maintain consistent temperatures, providing patrons with refreshing drinks every time.

Another hallmark of the Cornelius Cold Beverage Dispenser is its user-friendly interface. The intuitive touch panel allows for quick selection and customization of drinks, enhancing the customer experience. This feature simplifies operations for staff during busy hours, enabling rapid service and reducing wait times.

For maintenance and usability, the dispenser is equipped with a self-diagnostic system that alerts users to any potential issues before they escalate. This proactive feature minimizes downtime and ensures that the dispenser operates smoothly, leading to higher customer satisfaction.

Moreover, the dispenser’s hygienic design is notable. It includes removable components that are easy to clean and sanitize, which is essential in maintaining food safety standards. This characteristic not only prolongs the life of the unit but also contributes to the health and safety of customers.

In summary, the Cornelius Cold Beverage Dispenser combines versatility, advanced technology, and user-friendly features to create a remarkable solution for cold beverage service. With its modular design, energy-efficient refrigeration, intuitive interface, and hygienic construction, it stands out as a premier choice for businesses looking to enhance their beverage offerings while optimizing operational efficiency.
Top Page Image Contents