D-Link d-link manual Systemimage or a configuration file nvramstartup-con

		Software Installation 35
Table 5. Quick Start Commands
Command	Mode	Description
copy <tftp://	Privileged	Sets the destination (download) datatype to be an image
<ipaddress>/	EXEC	(system:image) or a configuration file (nvram:startup-con-
<filepath>/		fig).
<filename>>		The URL must be specified as:
nvram:startup-
		xmodem:<filepath>/<filename>
config
		For example:
		If the user is using Hyper Terminal, the user must specify
		which file is to be sent to the networking device.
		The Networking Device restarts automatically once the
		code has been downloaded.
copy <tftp://	Privileged	Sets the destination (download) datatype to be an image
<ipaddress>/	EXEC	(system:image) or a configuration file (nvram:startup-con-
<filepath>/		fig).
<filename>> sys-		The URL must be specified as:
tem:image		xmodem:<filepath>/<filename>
copy <tftp://	Privileged	Sets the destination (download) datatype to be a configu-
<ipaddress>/	EXEC	ration file.
<filepath>/		The URL must be specified as:
<filename>>
		tftp://<ipaddress>/<filepath>/<filename>
nvram:startup-
config		Before starting a TFTP server download, you must config-
		ure the IP address.
copy <tftp://	Privileged	Sets the destination (download) datatype to be an image.
<ipaddress>/	EXEC	The URL must be specified as:
<filepath>/
		tftp://<ipaddress>/<filepath>/<filename>
<filename>> sys-
tem:image		The system:image option downloads the code file.
clear config	Privileged	Enter yes when the prompt pops up to clear all the config-
	EXEC	urations made to the networking device.
copy sys-	Privileged	Enter yes when the prompt pops up that asks if you want
tem:running-	EXEC	to save the configurations made to the networking device.
config
nvram:startup-
config
reload (or cold boot	Privileged	Enter yes when the prompt pops up that asks if you want
the networking	EXEC	to reset the system.
device)		You can reset the networking device or cold boot the net-
		working device, both work effectively.