DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

computer has an entry. If it does, the local computer reads the remote computer’s MAC address and writes it into the destination field of the packets to be sent.

If the remote computer does not have an ARP cache entry, the local computer must send an ARP request and wait for a reply.

When the local computer receives the ARP reply packet, the local ARP reads the IP MAC address pair, and then checks the ARP cache for this entry. If there is an entry, it is updated with the new information. If there is no entry, a new entry is made.

There are two possible cases when an ARP packet is received by a local computer. First, the local computer is the target of the request. If it is, the local ARP replies by sending its MAC IP address pair back to the requesting system. Second, if the local computer is not the target of the request, the packet is dropped.

Multicasting

Multicasting is a group of protocols and tools that enable a single source point to send packets to groups of multiple destination points with persistent connections that last for some amount of time. The main advantage to multicasting is a decrease in the network load compared to broadcasting.

Multicast Groups

Class D IP addresses are assigned to a group of network devices that comprise a multicast group. The four most

significant four bits of a Class D address are set to “1110”. The following 28 bits is referred to as the ‘multicast group ID’. Some of the range of Class D addresses are registered with the

110

Switch Management and Operating Concepts

Page 110
Image 110
D-Link DES-3326S manual Multicasting, Multicast Groups, 110