D-Link DES-3326S manual Relay Status, Bootp Hops Count Limit, Relay Time Threshold, 282

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

Figure 6-81. BOOTP/DHCP Relay

The following fields can be set:

Parameter	Description
BOOTP/DHCP	This field can be toggled between
Relay Status	Enabled and Disabled using the pull-
<Disabled>	down menu.	It is used to enable or
	disable the	BOOTP/DHCP Relay
	service on the switch. The default is
	Disabled

BOOTP HOPS Count Limit [4 ]

BOOTP/DHCP

Relay Time

Threshold [0 ]

This field allows an entry between 1 and 16 to define the maximum number of router hops BOOTP messages can be forwarded across. The default hop count is 4.

Allows an entry between 0 and 65535 seconds, and defines the maximum time limit for routing a BOOTP/DHCP packet. If a value of 0 is entered, the switch will not

282 Web-Based Switch Management