D-Link DES-3326S manual Ipaddress xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy, 179

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

following at a minimum must be configured or known for the switch to be managed:

•IP Address

•Subnet Mask

•Administrator password

In addition, several other parameters may need to be configured or known to properly communicate with the switch or allow full management capability. These include:

•Default Gateway

•Trap Destination and Community Name

Configuration of these items may be made from the User Interface, which is accessible via either the serial console or Telnet. Refer to the User Guide that came with your system for more information subsection describe the required configuration.

Setting an IP Address

The IP address for the switch must be set before it can be managed with the web-based manager. The switch IP address may be automatically set using BOOTP or DHCP protocols, in which case the actual address assigned to the switch must be known.

The IP address may alternatively be set using the Command Line Interface (CLI) over the console serial port as follows:

3.Starting at the command line prompt DES3326S4# − enter the commands config ipif System

ipaddress xxx.xxx.xxx.xxx/yyy.yyy.yyy.yyy.

Web-Based Switch Management 179