D-Link DES-3326S manual Snmp Settings, To setup the switch for remote management, 192

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

SNMP Settings

Some settings must be entered to allow the switch to be managed from an SNMP-based Network Management System such as SNMP v1 or to be able to access the Switch using the Telnet protocol or the Web Manager.

To setup the switch for remote management:

Click the Management Station IP link in the Management menu. The following screen appears:

Figure 6-12. Management Station IP Settings

Management stations are computers on the network that will be used to manage the switch. You can limit the number of possible management stations by entering up to three IP addresses. If the three IP Address fields contain all zeros (“0”), then any station with any IP address can access the switch to manage and configure it. If there is one or more IP addresses entered in the IP Address fields, then only stations with the IP

192 Web-Based Switch Management