D-Link DES-3326S manual Ospf Area Setting, Current Route ID AS Border Router, State, 225

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

Current Route ID

AS Border Router

this case, it would be 10.255.255.255, but any unique 32- bit number will do. If 0.0.0.0 is entered, the highest IP address assigned to the switch will become the OSPF Route ID.

Displays the OSPF Route ID currently in use by the switch. This Route ID is displayed as a convenience to the user when changing the switch’s OSPF Route ID.

Autonomous System Border Router − determines whether or not the switch is configured as an AS Border Router.

State	Allows	OSPF to be	enabled or
	disabled globally on the switch
	without	changing	the	OSPF
	configuration.

OSPF Area Setting

This menu allows the configuration of OSPF Area IDs and to designate these areas as either Normal or Stub. Normal OSPF areas allow Link-State Database (LSDB) advertisements of routes to networks that are external to the area, Stub areas do not allow the LSDB advertisement of external routes. Stub areas use a default summary external route (0.0.0.0 or Area 0) to reach external destination.

Web-Based Switch Management 225