D-Link DES-3326S manual Manual, 190

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

	addresses, network masks, and default
	gateways to be assigned by a central
	BOOTP server. If this option is set, the
	Switch will first look for a BOOTP
	server to provide it with this
	information before using the default or
	previously entered settings.
DHCP	The switch will send out a DHCP
	broadcast request when it is powered
	up. The DHCP protocol allows IP
	addresses, network masks, and default
	gateways to be assigned by a DHCP
	server. If this option is set, the switch
	will first look for a DHCP server to
	provide it with this information before
	using the default or previously entered
	settings.
Manual	Allows the entry of an IP address,
	Subnet Mask, and a Default Gateway
	for the switch. These fields should be
	of the form xxx.xxx.xxx.xxx, where each
	xxx is a number (represented in
	decimal form) between 0 and 255. This
	address should be a unique address
	on the network assigned for use by the
	network administrator. The fields
	which require entries under this option
	are as follows:

Subnet Mask A Bitmask that determines the extent of the subnet that the Switch is on. Should be of the form xxx.xxx.xxx.xxx, where each xxx is a number (represented in decimal) between 0 and

255.The value should be 255.0.0.0 for a Class A network, 255.255.0.0 for a

190 Web-Based Switch Management