D-Link DES-3326S manual Saving Configuration Changes, 180

DES-3326S Layer 3 Fast Ethernet Switch User’s Guide

Where the x’s represent the IP address to be assigned to the IP interface named System and the y’s represent the corresponding subnet mask.

4.Alternatively, you can enter DES3326S4# − enter the commands config ipif System ipaddress xxx.xxx.xxx.xxx/z. Where the x’s represent the IP address to be assigned to the IP interface named System and the z represents the corresponding number of subnets in CIDR notation.

Using this method, the switch can be assigned an IP address and subnet mask which can then be used to connect a management station to the switch’s web-based management agent.

Saving Configuration Changes

Clicking the Apply button makes any configuration change active, but only for the current session. If the switch is restarted (rebooted) without entering the configuration changes into the non-volatile RAM (NV-RAM), the configuration changes will be lost.

To enter configuration changes into the switch’s non-volatile RAM, select Save Changes from the main screen. Click on the Save Configuration button to enter the current configuration into NV-RAM. The configuration will then be loaded into the switch’s memory when it is restarted.

180 Web-Based Switch Management