DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Using a 10.xxx.xxx.xxx IP address notation, the above example would give 6 network addresses and 6 subnets.
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address for an IP interface on the switch.
For this example, we have chosen the next IP address above the network address for the IP interface’s IP Address:
VLAN Name | VID | Network Number | IP Address |
|
|
|
|
System (default) | 1 | 10.32.0.0 | 10.32.0.1 |
|
|
|
|
Engineer | 2 | 10.64.0.0 | 10.64.0.1 |
|
|
|
|
Marketing | 3 | 10.96.0.0 | 10.96.0.1 |
|
|
|
|
Finance | 4 | 10.128.0.0 | 10.128.0.1 |
|
|
|
|
Sales | 5 | 10.160.0.0 | 10.160.0.1 |
|
|
|
|
Backbone | 6 | 10.192.0.0 | 10.192.0.1 |
Table
The 6 IP interfaces, each with an IP address (listed in the table above), and a subnet mask of 255.224.0.0 can be entered into the Setup IP Interface window.
To setup IP Interfaces on the switch:
Go to the Advanced Setup folder, and click on the Layer 3 IP Networking link, and then click on the Setup IP Interfaces link to open the following dialog box:
216 |
