D-Link DFL-700 manual Administrative users, Add Administrative User

Administrative users

Click on Firewall in the menu bar, and then click Users below it. This will show all the users, and the first section is the administrative users.

The first column show the access levels, Administrator and Read-only. An Administrator user can add, edit and remove rules, change settings of the DFL-700 and so on. The Read- only user can only look at the configuration. The second column shows the users in each access level.

Add Administrative User

Follow these steps to add a new administrative user.

Step 1. Click on add after the type of user you would like to add, Admin or Read-only.

Step 2. Fill in User name; make sure you are not trying to add one that already exists.

Step 3. Specify the password for the new user.

Click the Apply button below to apply the setting or click Cancel to discard changes.

Note: The user name and password should be at least six characters long. The user name and password can contain numbers (0-9) and upper and lower case letters (A-Z, a- z). Special characters and spaces are not allowed.

36