Connections
Click on Status in the menu bar, and then click Connections below it. A window will appear providing information about the content of the state table.
Shows the last 100
connections opened through the firewall.
Connections are created when traffic is permitted to pass via the policies.
Each connection has two timeout values, one in each direction. These are updated when the firewall receives packets from each end of the connection. The value shown in the Timeout column is the lower of the two values.
Possible values in the State column include: TPC_CLOSE, TCP_OPEN,
SYN_RECV, FIN_RECV and so on.
The Proto column can have:
TCP - The connection is a TCP connection
PING - The connection is an ICMP ECHO connection
UDP - The connection is a UDP connection
RAWIP - The connection uses an IP protocol other than TCP, UDP or ICMP
The Source and Destination columns show from what ip and port on the source interface is the connection, and to what interface with what port number is the connection to.
