D-Link DI-724GU manual PPPoE, IP Address Username Password Verify Password Service Name

Section 3 - Configuration

PPPoE

PPPoE: Select this option if your ISP requires you to use a PPPoE (Point to Point Protocol over Ethernet) connection. DSL providers typically use this option. This method of connection requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet.

Note: When using the PPPoE option, you will need to ensure that any PPPoE client software on your computers is removed or disabled.

Dynamic IP/Static IP:

IP Address:

Username:

Password:

Verify Password:

Service Name:

If your ISP has assigned a fixed IP address, select Static IP and enter the fixed IP address in the following field. For PPTP and L2TP, the subnet mask and the default gateway IP address must also be entered. If the ISP’s servers assign these values upon establishing a connection, select Dynamic IP.

When required, this value is provided by the ISP.

This value is provided by agreement between you and the ISP.

This value is provided by agreement between you and the ISP.

Re-enter the password.

Service Name is optional, but may be required by some ISPs. If your ISP provides a Service Name, enter the provided value here.

D-Link DI-724GU User Manual 32