|
|
Source | Make sure that Source is set to the appropriate paper input mode. |
| The Manual Feed source is used when printing on special materials. You need to load one sheet at a time into the paper tray. See |
| "Using Manual Feed Mode". |
| If the paper source is set to Auto Select, the printer automatically picks up print materials from the paper tray. |
|
|
Type | Make sure that Type is set to Printer Default. If you load a different type of print material, select the corresponding paper type. For |
| more information about print materials, refer to "Paper Handling". |
| If you are using cotton paper, set the paper type to Thick for the best results. |
| If you are using recycled paper or color paper, select Color Paper. |
|
|
Scaling | Scaling allows you to automatically or manually scale your print job on a page. You can choose from None, Fit to Page, and |
| Reduce/Enlarge. |
| For details, see "Fitting Your Document to a Selected Paper Size" and "Printing a Reduced or Enlarged Document". |
|
|
Graphics Tab
Use the following graphic options to adjust the print quality for your specific printing needs. See step 3 in "Printing a Document" for more information about accessing printer properties. Click the Graphics tab to display the properties shown below.
Property | Description | ||
|
| ||
Resolution | You can select the printing resolution by choosing from 600 dpi [Normal] or 300 dpi [Draft]. The higher the | ||
| setting, the sharper the clarity of printed characters and graphics. Higher settings may increase the time it takes | ||
| to print a document. | ||
|
| ||
Toner Save Mode | Selecting this option extends the life of your toner cartridge and reduces your cost per page without a | ||
significant reduction in print quality. | |||
| |||
| • On: Select this option to allow the printer to use less toner on each page. | ||
| • Off: If you don't need to save toner when printing, select this option. | ||
|
| ||
Darkness | Use this option to lighten or darken your print job. | ||
| • | Normal: This setting is for normal documents. | |
| • | Light: This setting is for documents with bolder line widths or darker | |
| • | Dark: This setting is for documents with finer line widths, higher definition graphics, and lighter | |
|
| images. | |
|
| ||
Advanced Options | You can set advanced settings by clicking the Advanced Options button. | ||
|
| ||
|
|
| |
