Figure 67. Removing and Installing the VGA Module |
|
| |
1. | control panel | 2. | |
3. | VGA module | 4. | securing tabs (2) |
5.
Installing The VGA Module—Rack Mode
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.
1.Align the VGA module with the securing tabs on the
2.Install the VGA module by pressing down the VGA module until it is fully seated in the securing tabs.
3.Connect the VGA cable to the
4.Install the control panel for rack mode in the
5.Install the
6.Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
7.If applicable, install the front bezel.
System Board
119
