2Turn the computer bottom-side up, loosen the captive screw in the memory module cover, and then remove the cover.

1

2

1 memory module cover

2

captive screw

NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.

3If you are replacing a memory module, ground yourself and remove the existing module:

a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.

b Remove the module from the connector.

118

Adding and Replacing Parts

Page 118
Image 118
Dell NY105 manual Memory module cover