NOTE: This card is only compatible with the Microsoft Windows Vista® operating system.

NOTE: If you ordered an FCM card with your computer, the card is already installed.

1Follow the procedures in "Before You Begin" on page 109.

2Remove the hinge cover (see "Hinge Cover" on page 111).

3Remove the keyboard (see "Keyboard" on page 111).

4Ground yourself by touching one of the metal connectors on the back of the computer.

NOTE: If you leave the area, ground yourself again when you return to the computer.

5Move the antenna cables away from the FCM card, ensuring that the protective sleeves do not slide off the cables.

6Release the card by pushing the metal securing brackets away from the card until the card pops up slightly.

2

1

3

 

1 FCM card

2

antenna cables (2)

3

metal securing brackets (2)

7Lift the card out of its connector.

Adding and Replacing Parts

129

Page 129
Image 129
Dell NY105 manual Lift the card out of its connector, 129, FCM card Antenna cables