2

1

1 securing clips (2 per connector)

2 memory module

NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.

4Ground yourself and install the new memory module:

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

aAlign the notch in the module edge connector with the tab in the connector slot.

bSlide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.

5Replace the cover.

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

Adding and Replacing Parts

119

Page 119
Image 119
Dell NY105 manual 119