126 Adding and Replacing Parts
NOTICE: To avoid damaging the system board, you must remove the battery before you begin working inside the
computer.
1
Follow the procedures in "Before You Begin" on page 117.
2
Turn the computer over and loosen the captive screws from the Mini-Card/modem cover.
3
Place your finger under the cover at the indentation, and lift the cover to remove it.
4
If a Mini-Card is not already installed, go to step5. If you are replacing a Mini-Card, remove the
existing card:
a
Disconnect the antenna cables from the Mini-Card.
PD598a01.book Page 126 Monday, February 6, 2006 2:24 PM