Dell SC1430 owner manual System Messages, for the appropriate drive installed in your system

Models: SC1430

1 160
Download 160 pages 23.85 Kb
Page 17
Image 17

Table 1-5. Diagnostic Indicator Codes During POST (continued)

Code

Causes

Corrective Action

 

 

 

 

Memory configuration error.

See "Troubleshooting System Memory" on page 103.

Possible system board resource and/or system board hardware failure.

See "Troubleshooting IRQ Assignment Conflicts" on page 96. If the problem persists, see "Getting Help" on page 123.

Possible system resource

See "Troubleshooting Your System" on page 95.

configuration error.

If the problem persists, see "Getting Help" on page 123.

 

 

 

Other failure.

Ensure that the diskette drive, optical drive, and hard drives are

 

properly connected. See "Troubleshooting Your System" on

 

page 95 for the appropriate drive installed in your system.

 

If the problem persists, see "Getting Help" on page 123.

 

 

The system is in a normal

Information only.

operating condition after

 

POST.

 

 

 

System Messages

System messages appear on the screen to notify you of a possible problem with the system. Table 1-6 lists the system messages that can occur and the probable cause and corrective action for each message.

NOTE: If you receive a system message that is not listed in Table 1-6, check the documentation for the application that is running when the message appears or the operating system's documentation for an explanation of the message and recommended action.

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

Table 1-6. System Messages

Message

Causes

Corrective Actions

 

 

 

Alert! Air temperature

The front panel thermal diode cable is

Verify that cables are firmly seated in the

sensor not detected.

improperly installed or has failed.

connectors on the front I/O panel and

 

 

the system board. See "Front I/O Panel

 

 

(Service Only Parts Procedure)" on

 

 

page 89.

About Your System

17

Page 17
Image 17
Dell SC1430 owner manual for the appropriate drive installed in your system, System Messages Causes Corrective Actions