Dell SC1430 Installing the Power Supply, Removing the Power Supply Power supply release tab

Figure 3-25. Removing the Power Supply

2

1

3

1 power supply release tab 2 power supply 3 screws (4)

Installing the Power Supply

1Prepare the new power supply for installation.

2Align the power supply mounting holes with the mounting holes on the back panel.

3Slide the power supply toward the back panel, into the hooks on the side and bottom of the chassis, until it snaps into place over the power-supply release tab.

4Using a #2 Phillips screwdriver, install the four Phillips screws that secure the power supply to the back panel.

5Rotate the hard-drive carrier back into the system. See "Rotating the Hard-Drive Carrier Into the System" on page 46.

6Reconnect the power-supply cables.

7Close the system. See "Closing the System" on page 43.

82

Installing System Components