5Push the new device into the bay until it clicks.

6If you removed a device security screw in step 1, replace it.

Hinge Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.

1Follow the procedures in "Before You Begin" on page 107.

2Turn the computer top-side up, and then open the display all the way (180 degrees) so that it rests on your work surface.

NOTICE: To avoid damaging the hinge cover, do not lift the cover on both sides simultaneously.

3Insert a scribe in the indent to carefully pry up the hinge cover on the right side.

112

Adding and Replacing Parts

Page 112
Image 112
Dell UY691 manual Hinge Cover