126 Adding and Replacing Parts
5
Connect the new card to the cable.
6
Install the new card by rotating and sliding into the retention tab in the compartment.
7
Reinstall the hinge cover.
Coin-Cell Battery
CAUTION: Before performing the following procedures, follow the safety instructions in your Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically
touching a connector on the back panel of the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside
the computer.
1
Follow the procedures in "Before You Begin" on page 107.
2
Remove the memory module cover (see "Memory" on page 115).
1card 2card connector 3cable connector
3
21