Problems and Solutions
Infrared Communications Problems (Continued)
Problem | Possible Cause | Solution |
|
|
|
System does not initiate | The system cannot | Disable Infrared Monitor |
Standby while infrared | initiate Standby while | search in your operating |
port is enabled. | Infrared Monitor search | system. |
| is enabled. |
|
|
|
|
Modem Problems
Problem | Possible Cause | Solution |
Modem does not work. Modem cable is not plugged into the correct notebook jack.
To find the right jack, refer to the external components information in the Hardware Guide on this CD.
Incorrect line type | Make sure the correct |
(pulse or tone) is | line type has been |
selected. | selected. Refer to the |
| Modem and Networking |
| Guide on this CD for |
| details. |
No dial tone, with or without “No dial tone” message.
Modem is connected to | Connect the modem |
a digital line. | to a standard analog |
| telephone line and |
| reestablish the |
| connection. |
|
|
You are not in your | Refer to the Modem and |
home country and the | Networking Guide on |
modem does not | this CD for instructions |
recognize the local | on using the modem in |
dial tone. | another country. |
Troubleshooting |
