DeWalt DWE4519, DWE4517 Save These Instructions For Future Use, Familiarization, Motor

•ANSI $12.6 ($3.19) hearing protection,

•NIOSH/OSHA/MSHA respiratory protection.

A WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromMm from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

V	volts
Hz	hertz
min	minutes
---.	.... direct current
(_)	Class I Construction
	(grounded)
[]	Class II Construction
	(double insulated)
.../min...	per minute
IPM	impacts per minute
SPM	strokes per minute
sfpm	surface feet per
	minute

A	amperes
W	watts
"_	alternating	current
.........	alternating	or direct
	current
no	no load speed
n	rated speed
G	earthing terminal
A	safety alert symbol
BPM	beats per minute
RPM	revolutions per
	minute

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.

_ WARNING: Use of this tool can generate and/or disperse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body.

WARNING: Always wear proper personal hearing protection

that conforms to ANSI $12.6 ($3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.

•The label on your tool may include the following symbols. The symbols and their definitions are as follows:

SAVE THESE INSTRUCTIONS FOR

FUTURE USE

Motor

Be sure your power supply agrees with the nameplate marking. Voltage decrease of more than 10% will cause loss of power and overheating. DEWALT tools are factory tested; if this tool does not operate, check power supply.

FAMILIARIZATION

Large Angle Grinders and Large Angle Sanders are designed for heavy material removal in extended use applications. The following grinders and sanders are described in this manual:

DWE4817 7" Angle Grinder double insulated 8,500 rpm

DWE4819 9" Angle Grinder double insulated 6,800 rpm