8. If T V light flashes three times, the code is valid and you can go to step 9. If T V light does not flash at all, the code may not have been entered correctly. So, start over from step 3 and try the code again.
9.Press 
while looking at the channel number display on your VCR. If the VCR is trying to
change channels to the channel you wrote in step 2 on page 15, go on to the next section to set up 
for your VCR. If not, pick another code for your VCR brand from the VCR code tables and go back to step 3.
Note: The way your VCR displays channel numbers may differ from the description above. See the User’s Guide that came with your VCR for more information.
If you have tried all of the codes and none work, go to How to Scan for VCR Codes on page 22.
SETTING UP 
ON YOUR REMOTE CONTROL
1.Make sure your satellite receiver, VCR, and TV are connected and your remote control is set up to control your VCR using the instructions in the previous sections.
2.Turn on your VCR and tune your VCR to a channel other than 3 or 4 (for example, 5).
3. Press T V to turn on your TV.
4.Press 
. Make sure your VCR tunes to either Channel 3 or 4.
5.Press the MENU button. If you see the satellite receiver Menu screen, go to step 26. If not, go to step 6.
118866 | 17 |
