Dish Network EZ manual Press and hold the

6.Write the number in step 2 from page 15 into the blank in step 10 below.

7.	Press and hold the		until both SAT	T V	lights
	turn on (it takes about five seconds).
8.	Release	and SAT	light will flash.
9.	Press the RECALL button.
10.Enter 0-			.
11.Press the MUTE button while watching				SAT	light.
12.If the SAT		light flashes three times, go to
	step 13. If	SAT light does not flash, go to step 7

and try again.

13.Press . Make sure your VCR tunes to the channel in step 10.

14.Press the MENU button. If you see the satellite receiver Menu screen, go to step 26. If not, go to step 15.

15.Answer the questions in the Table 2. The information you provide is what you will use to teach your remote control to change the channel on your VCR correctly.

18 118866