Dish Network EZ manual To use the remote control to get programs from an off-air

USING THE REMOTE CONTROL FOR OFF-AIR TV PROGRAMMING

OFF-AIR CHANNEL CONTROL BUTTON

To use the remote control to get programs from an off-air

antenna and operate your TV, you must first press , which will do three things:

•Turns off the satellite receiver to pass through your off-air antenna to your TV tuner. To watch off-air

channels, you must have an off-air antenna connected

as instructed in Setting Up to Switch the TV to a Preferred Off-Air Channel on page 12.

•Tunes your TV to your preferred off-air channel. This

function works only if you have completed the

instructions in Setting Up to Switch the TV to a Preferred Off-Air Channel on page 12.

•Makes the remote control buttons work as described below to support off-air programming. For any of these buttons to work, you must first have completed the instructions in Setting Up the Remote to Control Your TV on page 7.

T V

POWER BUTTON

Press the POWER button to turn the TV on or off.

VOL

VOLUME BUTTON

Press these buttons to raise (+) or to lower (-) the sound volume on the TV.

30 118866